'SUPERTECH' REINFORCED DEPRESSED CENTRE CUTTING & GRINDING DISCS & FLAT CUT OFF DISCS ARE AVAILABLE FROM STOCK IN THE FOLLOWING SIZES.
DCD Grinding (Metal & Stone)
100mm x 6mm x 16.0mm
115mm x 6mm x 22.2mm
125mm x 6mm x 22.2mm
180mm x 6mm x 22.2mm
230mmx 6mm x 22.2mm
Depressed centre grinding wheels are also available in 4.0mm, 8.0mm and 10.0mm thicknesses depending on wheel diameter.
DCD Cutting (Metal & Stone)
100mm x 3mm x 16.0mm
115mm x 3mm x 22.2mm
125mm x 3mm x 22.2mm
180mm x 3mm x 22.2mm
230mm x 3mm x 22.2mm
Flat Cutting (Metal & Stone)
100mm x 2.5mm x 16.0mm
115mm x 2.5mm x 22.2mm
125mm x 2.5mm x 22.2mm
180mm x 2.5mm x 22.2mm
230mm x 2.5mm x 22.2mm
300mm x 3mm x 20.0mm*
350mm x 3mm x 20.0mm *
*Also available in bore sizes 22.2mm and 25.4mm
We also supply special thin cutting discs in the following sizes:
115mm x 1.0mm /1.2mm /1.6mm / 2.0mm x 22.2mm
125mm x 1.0mm /1.2mm /1.6mm / 2.0mm x 22.2mm
150mm x 1.2mm /1.6mm / 2.0mm x 22.2mm
180mm x 1.6mm / 2.0mm x 22.2mm
230mm x 1.6mm / 2.0mm x 22.2mm
For stainless steel applications discs are available in all of the above sizes.
Professional Flap Discs
These are available in both aluminium oxide and zirconium and with either a nylon or fibreglass backing pad.
115mm x 22mm
125mm x 22mm
180mm x 22mm
Other diameters are available on request
If you would like to try samples of our 'Supertech' abrasive products please contact us using any of the methods shown on the contact page.